Gigabyte GA-X58A-UD3R Manual - Page 107
For the JMicron JMB362/GIGABYTE SATA2, RAID/AHCI Driver for GIGABYTE GBB36X Controller
UPC - 818313009760
View all Gigabyte GA-X58A-UD3R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
For the JMicron JMB362/GIGABYTE SATA2: Insert the floppy disk containing the SATA RAID/AHCI driver and press . Then a controller menu similar to Figure 3 below will appear. Select RAID/AHCI Driver for GIGABYTE GBB36X Controller (x32) and press . Windows Setup You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk provided by an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen. RAID/AHCI Driver for GIGABYTE GBB36X Controller (x32) ENTER=Select F3=Exit Figure 3 For the Marvell 9128: Insert the floppy disk containing the SATA AHCI driver and press . The screen will display two drivers, both of which need to be installed (Figure 4). First select Marvell shared library (install first) and press . On the next screen, press to return to the screen in Figure 4. Then select Marvell 91xx SATA Controller 32bit Driver and press . When both of the two drivers appear on the confirmation screen, press to continue the driver installation. Windows Setup You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk provided by an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen. Marvell shared library (install first) Marvell 91xx SATA Controller 32bit Driver ENTER=Select F3=Exit Figure 4 Step 3: On the next screen, press to continue the driver installation. After the driver installation, you can proceed with the Windows XP installation. - 107 - Appendix