Gigabyte Z590 AORUS XTREME WATER User Manual - Page 12

Internal Connectors Back Panel Connectors I/O Controller Hardware Monitor BIOS Š 1 x 24-pin ATX main power connector Š 2 x 8-pin ATX 12V power connectors Š 1 x CPU fan header Š 1 x water cooling CPU fan header Š 1 x water cooling kit CPU LED header (LED_CPU) Š 1 x water cooling kit Chipset LED header (LED_PCH) Š 6 x system fan headers Š 2 x system fan/water cooling pump headers Š 1 x noise detection header Š 2 x integrated extension cable headers for addressable and RGB LED strips Š 6 x SATA 6Gb/s connectors Š 3 x M.2 Socket 3 connectors Š 1 x front panel header Š 1 x front panel audio header Š 1 x USB Type-C® header, with USB 3.2 Gen 2x2 support Š 1 x USB 3.2 Gen 1 header Š 1 x USB 2.0/1.1 header Š 2 x temperature sensor headers Š 1 x power button Š 1 x reset button Š 1 x OC Ignition button Š 2 x BIOS switches Š Voltage Measurement Points Š 1 x Q-Flash Plus button Š 1 x Clear CMOS button Š 2 x SMA antenna connectors (2T2R) Š 2 x Thunderbolt™ 4 connectors (USB Type-C® ports, with USB 3.2 Gen 2 support) Š 8 x USB 3.2 Gen 2 Type-A ports (red) Š 1 x HDMI port Š 2 x RJ-45 ports Š 1 x optical S/PDIF Out connector Š 5 x audio jacks Š iTE® I/O Controller Chip Š Voltage detection Š Temperature detection Š Fan speed detection Š Water cooling flow rate detection Š Fan fail warning Š Fan speed control * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install. Š Noise detection Š 2 x 256 Mbit flash Š Use of licensed AMI UEFI BIOS Š Support for DualBIOS™ Š PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 Hardware Installation - 12 -