Gigabyte Z590 AORUS XTREME WATER User Manual - Page 57
NVMe Configuration, SATA And RST Configuration, Configured as eSATA, SATA Controllers
View all Gigabyte Z590 AORUS XTREME WATER manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
NVMe Configuration Displays information on your M.2 NVME PCIe SSD if installed. SATA And RST Configuration && SATA Controller(s) Enables or disables the integrated SATA controllers. (Default: Enabled) && SATA Mode Selection Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers to AHCI mode. Intel RST Premium With Intel Optane System Acceleration Enables RAID for the SATA controller. AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) && Aggressive LPM Support Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset SATA controllers. (Default: Disabled) && Port 0/1/2/3/4/5 Enables or disables each SATA port. (Default: Enabled) && SATA Port 0/1/2/3/4/5 DevSlp Allows you to determine whether to let the connected SATA device go into sleep mode. (Default: Disabled) && Hot plug Enables or disable the hot plug capability for each SATA port. (Default: Disabled) && Configured as eSATA Enables or disables support for external SATA devices. - 57 - BIOS Setup