Gigabyte Z590 AORUS XTREME WATER User Manual - Page 17
left picture. Then tighten the four screws M3*6.5 with washers to the mounting holes in the Chipset area
View all Gigabyte Z590 AORUS XTREME WATER manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Step 3: Carefully flip the motherboard over, fasten the CPU backplate using the four screws (M3*10.8) in a diagonal sequence. Screw (M3*10.8) Step 4: Tighten the three screws (M3*6.5) with washers to the mounting holes in the CPU area (refer to the bottom left picture). Then tighten the four screws (M3*6.5) with washers to the mounting holes in the Chipset area in a diagonal sequence (refer to the bottom right picture). Make sure the water cooling kit is securely attached. Screw with washer (M3*6.5) Screw with washer (M3*6.5) - 17 - Hardware Installation
- 17 -
Hardware Installation
Step 4:
Tighten the three screws (M3*6.5) with washers to the mounting holes in the CPU area (refer to the bottom
left picture). Then tighten the four screws (M3*6.5) with washers to the mounting holes in the Chipset area in
a diagonal sequence (refer to the bottom right picture). Make sure the water cooling kit is securely attached.
Step 3:
Carefully flip the motherboard over, fasten the CPU backplate using the four screws (M3*10.8) in a diagonal
sequence.
Screw
(M3*10.8)
Screw with washer
(M3*6.5)
Screw with washer
(M3*6.5)