Haier HT18TS45SW HT18TW10SW - Page 12

REVERSING THE DOOR ENGLISH DOOR SWING REVERSAL On black or white models, the door hinges and handles can be reversed to accommodate your needs. NOTE: Door reversal is not available on stainless steel door models. 5. Remove the door by (a) pulling the top of the door away from the cabinet and (b) lifting it at the same time. (Fig. 8) Fig. 8 REMOVING THE HANDLES Please refer to the appropriate Door Handle Installation section to determine how to remove the handles from your refrigerator. REMOVING DOORS AND HINGES 1. Use adhesive tape to secure both sides of the freezer and refrigerator doors to the sides of the cabinet. (Fig.6) 6. Move the door stop on the bottom of the door to the opposite side and secure with original screws, then place the door aside. Fig. 9 Fig. 6 2. Remove the hinge cover screw and the top hinge cover. (Fig. 7) 3. Remove the two bolts that mount the top hinge to the cabinet and then remove the hinge by raising it vertically. (Fig. 7) Fig. 7 Hinge Cover Screw Hinge Cover 7. Unscrew the center hinge pin by rotating counterclockwise, being careful not to lose the spacers from the top section of the pin. (Fig. 10) 8. Remove the refrigerator door in the same manner as the freezer door, first removing the tape and then lifting up and away from the cabinet. (Fig. 10) Relocate the door stop on the bottom of the door to the opposite side of the door. (Fig. 9) Place the door aside. Fig. 10 Bolts Top Hinge 9. Remove the center hinge and spacer. (Fig. 11) Thimble Hole 4. Carefully remove the adhesive tape holding the freezer door to the cabinet while holding the door to the cabinet. Fig. 11 PAGE 10 • SET UP & USE