Haier HT18TS45SW HT18TW10SW - Page 14

ENGLISH REVERSING THE DOOR CONT. 7. Replace top hinge cap and secure using original screw. Fig. 17 7 6 Be sure to follow the manufacturer's instructions when using these products. Do not use any abrasives or scouring pads to remove the residue. Use a putty knife to pry out the plug buttons covering the handle mounting holes on the face of the door, being careful not to scratch the door finish. To re-install handles, please see the Door Handle Installation section. NOTE: Prior to re-installing handles, remove the Haier© logo badge from the face of the door using a putty knife to gently pry it from the door face. Any residue left on the face of the door from the badge should be removed by using Goo Gone© or WD-40©. FEATURES AND USE NOTE: All features not available on all models. NOTE: If refrigerator has been placed in a horizontal position for any period of time, wait 4 hours after returning it to the upright position before plugging it in. TEMPERATURE CONTROL KNOBS Your refrigerator will automatically maintain the set temperature level. Turning the temperature knob to the left will make both refrigerator and freezer compartments warmer. Turning the knob to the right will make both compartments colder. You can turn the knob in either direction to adjust the temperature to your needs. We recommend setting the knob to the straight up and down position and allowing it to run for at least 24 hours before adjusting the temperature. Turning the knob all the way left to the Off position will turn off the refrigeration system, but does not remove power to the refrigerator. The freezer compartment also features a fan tower knob, which is used to regulate air flow into the compartment to fine tune the freezer. As with the refrigerator temperature knob, we recommend setting the knob to the straight up and down position and allowing it to run for at least 24 hours before adjusting it. Refrigerator Temperature Knob Freezer Fan Tower Knob PAGE 12 • SET UP & USE