Harman Kardon AVR 630 Owners Manual - Page 14

MAIN REMOTE CONTROL FUNCTIONS

¼

Memory Button:

Press this button to enter a

radio station to the AVR 630’s preset memory. First,

tune the desired station, and then press this button.

Within five seconds of when you see the station’s

frequency flash in the

Upper Display Line

#

and

in the on-screen display, press the numeric keys

for the preset number between 01 and 30 that you

wish to assign to the station. (See page 34 for more

information.)

½

Stereo Mode Select Button:

Press this button

to select a stereo listening mode. When the button is

pressed so that

SURROUNDOFF

appears in

the

Lower Display Line

$

, the AVR will operate in a

bypass mode with true, fully analog, two-channel

left/right stereo mode with no surround processing or

bass management, as opposed to other modes where

digital processing is used. When the button is pressed

so that

SURROUNDOFF

appears in the

Lower

Display Line

$

, and the

DSP

and

SURROUND

OFF

Surround Mode Indicators

%

are lit, you will

enjoy a two-channel presentation of the sound along

with the benefits of bass management. Depending on

whether your system is configured for 5.1 or 6.1/7.1

channels, the next press of the button will cause either

5CHSTEREO

or

7CHSTEREO

to

appear, and the stereo signal will be routed to all five

(or seven) speakers. (See page 31 for more informa-

tion on stereo playback modes.)

¾

DTS Neo:6 Mode Select Button:

Press this

button to select a DTS Neo:6 mode. (See page 31

for the available DTS Neo:6 options.)

¿

DTS Digital Mode Select Button:

When a

DTS-encoded digital source is playing, each press of

this button will scroll through the available DTS modes.

The specific choice of modes will vary according to

the type of encoding on the disc and your system’s

speaker configuration. When a DTS source is not in

use, this button has no function. (See page 31 for the

available DTS digital options.)

À

Dolby Mode Select Button:

This button is used

to select from the available Dolby Surround modes.

Each press of this button will select

one of the Dolby

Pro Logic II modes or Dolby 3 Stereo.

When a Dolby

Digital-encoded source is in use, the Dolby Digital

mode may also be selected. (See page 31 for the

available Dolby surround mode options.)

Á

6-Channel/8-Channel Input Select:

Press this

button to select the device connected to the

6-

or

8-

Channel Direct Inputs

. (See page 29 for more

information.)

Â

SPL Select Button:

This button activates the

EzSet function to quickly and accurately calibrate the

AVR 630’s output levels. When the button is pressed

you will then need to select between automatic EzSet

operation or using the remote as a manual SPL meter

by pressing the

⁄

/

¤

Navigation Button

o

until

your choice appears in the remote’s LCD display.

Press the

Set Button

q

to enter the setting, and

then follow the instructions as displayed in the LCD

display. (For complete information, see page 26.)

Ã

EzSet Microphone Sensor:

The microphone

sensor that is used by the EzSet system is behind the

three slots at the top of the remote control. When

using EzSet to calibrate the AVR 630, be certain that

the slots are not covered. (See page 26 for more

information on using EzSet.)

Ä

Lens:

The infrared emitters behind the plastic

lens at the top of the remote communicate the remote

codes to the AVR 630. Be certain that the lens is not

covered when using the remote, and point the lens

toward the AVR for best results. In learning mode, the

remote receives IR codes to be learned through a

sensor behind the lens.

NOTE:

DO NOT remove the rubber plug that is supplied

to cover the jack on the upper right side of the remote.

The jack is not active and is reserved for future use.

40

14

MAIN REMOTE CONTROL FUNCTIONS

Harman Kardon AVR 630 Owners Manual - Page 14

DTS Digital Mode Select Button - specifications

Page 14 highlights