Harman Kardon AVR 630 Owners Manual - Page 45
Punch-Through Configuration - review
View all Harman Kardon AVR 630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
CONFIGURING THE REMOTE next to the bracketed read-out of the underlying device (e.g., [AVR] POWER ON). 6. When you are finished reviewing the macro's contents, press the Set Button q to return the remote to normal operation. Punch-Through Configuration Punch-through is a capability of the remote that allows the Volume controls, Channel Up/Down buttons or Transport keys (Play, Stop, Record, Fast Forward and Reverse, and Skip Up/Down) to link to a different device. For example, if your TV, cable box or satellite receiver is connected through the AVR 630, you will most likely want to use the AVR 630's volume control commands even when the remote has been set to issue all other commands for the video device. "Punch-through" enables you to easily program the remote to do this. Volume Punch-Through Follow these steps to enable the Volume Up/Down and Mute controls from one device to be used when the remote is otherwise programmed for a different device. NOTE FOR VOLUME PUNCH-THROUGH: The remote's default settings are for the AVR 630's volume controls, to be used when any input or device is selected, with the exception of the VID 2/TV button. There is no need to program the remote for volume punch-through for the AVR 630's controls with other sources, such as DVD. To have the AVR 630's volume commands used when the TV device is selected, follow these steps: 1. Press and hold the Program Button O for about three seconds while the message shown in Figure 17 appears in the remote's LCD Information Display 2. Release the button when the red light under the Set Button q appears. 2. The remote's MAIN MENU message (Figure 18), will appear in the LCD display and the Set Button q will remain illuminated in red. Press the ⁄/¤ Navigation Button o until PUNCH-THROUGH appears on the bottom line of the LCD screen, as shown in Figure 50. Press the Set Button q to enter the main punch-through menu branch. MAIN MENU PUNCH-THROUGH Figure 50 3. At the next menu screen (Figure 51) press the Set Button q to begin programming the remote for Volume punch-through. PUNCH-THROUGH VOLUME Figure 51 4. The next display screen (Figure 52) is where you select the device that will receive the punchthrough commands. In our example, that is the VID 2/TV button, as that is where we want the AVR 630's volume controls to be active. Press the ⁄/¤ Navigation Button o until the name of the base device appears and then press the Set Button q. DEVICE IN USE TV Figure 52 5. At the next display screen (Figure 53), you will select the device whose Volume Up/Down and Mute commands will be used. Press the ⁄/¤ Navigation Button o until the desired device's name appears to the right of the device in use. In our example, that is the AVR 630 (indicated by AVR). When the desired combination of devices appears, press the Set Button q. PUNCH-THROUGH TV