Hayward TriStar XL HCP3000 Series Variable Speed Pump - Owners Manual - Page 19

Screen 17. Set Password 0___ Buttons Used + < > Comments Use to set selected password character. Move to next password character/next menu item. 18. Confirm Password 0___ + - Use to set selected password character. < > Move to next password character/next menu item. NOTE: If the new password is not confirmed correctly, then the user will be prompted again to confirm the password. If a mistake is made when entering the password, pressing Stop/Resume will cancel the action. After a password has been set, follow the procedure below to unlock the system from the Home screen. 19. System Locked Password: 0___ + - Use to set selected password character. < > Move to next password character. NOTE: When password protection is enabled and the timeout has elapsed, the user will be prompted to enter the password to unlock the display when any of the display buttons (other than Stop/Resume) are selected. The user may use Stop/Resume to stop the pump and resume normal operation without having to enter the password. The factory default password is 1234. If the password has been changed, it may be reset to factory default by pressing and holding the Speed 1 and Speed 4 buttons at the same time while powering on the drive, or by resetting all parameters in the Configuration Menu. If a mistake is made when entering the password, pressing Stop/Resume will cancel the action. If the pump is being controlled by a Hayward or third party pool control, the pump display can be locked by the password, however, the pump will respond to any and all commands being sent from the pool control. 20. Reset all settings? + yes or - no + - Use + button to reset to factory default settings. < > Use > button to skip reset. 21. Are you sure? + yes or - no + - Confirm reset of all parameters. < > Move to next menu item. 22. Use Timers Menu to set daily timers Timers Menu Screen 1. Timer Menu Press > to enter 2. Press +/- to change or > to view next item 3. Timer 1 1725rpm 12:00a to 11:45p 4. Press + to change or > next timer Buttons Used < > Comments Use > button to enter Timer Menu. + - Use + button to change displayed timer. < > Use > button to skip to next timer. 18 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS