Hayward TriStar XL HCP3000 Series Variable Speed Pump - Owners Manual - Page 21

Diagnostic Menu Screen 1. Diagnostic Menu Press > to enter Buttons Used < > Comments Use > button to enter Diagnostic Menu and toggle between displays. 2. Press > to view next item 3. Display Revision 2.00 Displays firmware version of the display PCB. 4. Drive Serial Number 3581200032 Displays motor drive serial number. 5. Comm Rev: 10.10 Drv Rev: 2.00.65 Displays firmware revisions of the motor drive and drive interface PCBs. 6. Event Log Press > to view < > Use > button to view event log. NOTE: For troubleshooting purposes, the Event Log will record the last twenty error/trip conditions and/or status messages, as well as the amount of time that has elapsed since the condition occurred. See page 25 for more detail. Stop/Resume Screen 1. Pump is stopped; press Stop/Resume 2. again to resume normal operation NOTE: When Stop/Resume is pressed at any time during normal operation, the above message will be displayed. The pump will stop within several seconds, and will remain stopped until Stop/Resume is pressed a second time, at which point the pump will resume normal operation. Quick Clean Screen 1. Quick Clean Quick Clean running 2. Quick Clean 3450 rpm for 60 min; 20 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS