HP 1010 HP Fax 1010 series - (English) User Guide - Page 23

speed dialing speed dialing speed dialing speed dialing speed dialing speed dialing speed dialing speed dialing speed dialing 4 Your HP Fax has a built-in phone book that allows you to enter up to 50 names and numbers for faxing or telephone use. Once entered, you can dial the number by any of these methods. • One-Touch (first 10 numbers) • Speed dial code • Searching the phone book All numbers must be stored in the phone book before use. store a number in the phone book Once in the phone book these numbers can be dialed using one touch buttons, speed dial codes, or by searching the phone book. 1 Hold the Speed Dial button for about two seconds. The display shows Speed [00-50]>##. 2 Enter a two-digit (00-50) number and press Start/Enter. Numbers from 00 to 09 will be used for One-Touch dialing, and from10 to 50 for Speed dialing. 3 Enter the telephone/fax number you want to store (up to 40 digits) and press Start/ Enter. • If you want a pause between numbers (for example, when entering an access code where you need to wait for a second dial tone), press Redial/Pause. A P appears in the display. For a longer pause, simply press Redial/Pause again. • If you make a mistake while entering a number, use to move the cursor under the digit, then enter the correct digit. Cancel will backspace delete in the field. 4 Enter the name (up to 20 characters) and press Start/Enter. If you do not want a name, just skip this step by pressing Start/Enter. Tip! If you have subscribed to a Caller ID service, we recommend that you enter a name. 5 Press Cancel to exit. print the phone book 1 Press Report/Help. 2 Press until Phonebook displays and press Start/Enter. store a number in the phone book 17