HP 10622 Best practices for HP 10000 Series and HP 10000 G2 Series Racks - Page 25

Figures 14 - 17 illustrate the front door clearance for 10000 G2 Series Racks. Front door clearance for 10000 Series Racks configured with 600-mm baying brackets: Figure 14. 95° access with one door closed Figure 15. 118° access with both doors open 10000 G2 Series Racks configured with 24-inch baying brackets: Figure 16. 108° access with one door closed Figure 17. 118° access with both doors open Qualified shipping All 10000 Series 42U, 36U, and 22U 600-mm wide racks can be shipped in three standard shipping configurations, depending on the shipping environment and configuration. Shipment of empty racks is typically done on a standard wooden pallet, but a horizontal shipping crate is also available where severe distribution environments are anticipated Ensure all of the following conditions are met when shipping a configured rack: • All configured racks must be shipped on a shock pallet. • Designated hardware must be configured in the rack. • Shipping recommendations of this document must be followed. • The configured rack must be shipped in an upright position. Contact the HP Rack Configuration Center for special shipment situations requirement additional protection. The above information applies to the both 10642 G2 and 10636 G2 Series Racks. Both the 10000 G2 42U and 36U Series Racks are available in all three shipping configurations: standard pallet, Configure to Order (CTO) shock pallet, horizontal crate. 23