HP 10622 Best practices for HP 10000 Series and HP 10000 G2 Series Racks - Page 37
When rolling the rack up the ramp, make sure to push firmly on the doorframe and not the door
View all HP 10622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
2. Roll the rack up the ramps (with fixed casters up the ramp first) and place the rack on the pallet. When rolling the rack up the ramp, make sure to push firmly on the doorframe and not the door mesh. NOTE Raise the leveling feet up into the rack to allow ease of movement over the ramp and pallet. Figure 21. Placing the rack on the pallet 3. Remove the ramps from the pallet and repack the ramps in the original box. Figure 22. Removing the ramp assembly 35
35
2.
Roll the rack up the ramps (with fixed casters up the ramp first) and place the rack on the pallet.
When rolling the rack up the ramp, make sure to push firmly on the doorframe and not the door
mesh.
NOTE
Raise the leveling feet up into the rack to allow ease of movement over the
ramp and pallet.
Figure 21.
Placing the rack on the pallet
3.
Remove the ramps from the pallet and repack the ramps in the original box.
Figure 22.
Removing the ramp assembly