HP 10622 Best practices for HP 10000 Series and HP 10000 G2 Series Racks - Page 38

be between 0.88 inch 22.352 mm and 1 inch 25.4 mm from the pallet deck. Place

Get HP 10622 PDF manuals and user guides View all HP 10622 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

4. Center the rack on the pallet, and position the hold-down brackets with bolts and lock washers and load spreader plate into the threaded holes in the pallet deck. Figure 23. Positioning the hold-down brackets 5. Place a metal shipping bracket and load spreader plate under each leveling foot. Extend all four leveling feet until they just short of touching the top surface of the brackets. The leveling feet should be between 0.88 inch (22.352 mm) and 1 inch (25.4 mm) from the pallet deck. Place the shipping bracket onto the leveling feet through the keyhole in the bracket. Figure 24. Positioning the rack onto the pallet 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
36
4.
Center the rack on the pallet, and position the hold-down brackets with bolts and lock washers
and load spreader plate into the threaded holes in the pallet deck.
Figure 23.
Positioning the hold-down brackets
5.
Place a metal shipping bracket and load spreader plate under each leveling foot. Extend all four
leveling feet until they just short of touching the top surface of the brackets. The leveling feet should
be between 0.88 inch (22.352 mm) and 1 inch (25.4 mm) from the pallet deck. Place the
shipping bracket onto the leveling feet through the keyhole in the bracket.
Figure 24.
Positioning the rack onto the pallet