HP 10622 Best practices for HP 10000 Series and HP 10000 G2 Series Racks - Page 36
and 10000 G2 Series Rack packing and shock pallet assembly
View all HP 10622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
10000 and 10000 G2 Series Rack packing and shock pallet assembly NOTE To dismount the rack from the CTO shock pallet, reverse the following instructions. NOTE Refer to Figure 34 for dismounting instructions. To install a 10000 Series Rack onto a shock pallet: 1. Unpack and attach the ramp rails to the pallet. Figure 20. Attaching rack rails NOTE If components have been removed for shipping, care should be taken to ensure that the rack is stable prior to rack installation onto the shock pallet. Place the remaining components in the lower portion of the rack to ensure that the rack is not top-heavy or unstable during shipment. 34
34
10000 and 10000 G2 Series Rack packing and shock pallet assembly
NOTE
To dismount the rack from the CTO shock pallet, reverse the following
instructions.
NOTE
Refer to Figure 34 for dismounting instructions.
To install a 10000 Series Rack onto a shock pallet:
1.
Unpack and attach the ramp rails to the pallet.
Figure 20.
Attaching rack rails
NOTE
If components have been removed for shipping, care should be taken to
ensure that the rack is stable prior to rack installation onto the shock pallet.
Place the remaining components in the lower portion of the rack to ensure
that the rack is not top-heavy or unstable during shipment.