HP 2000fc HP StorageWorks 2012fc Modular Smart Array user guide (481597-001, M - Page 21
Table 1-8, Drive Enclosure LEDs Back View
View all HP 2000fc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Figure 1-5 shows the LEDs at the back of the drive enclosure. AC Power Good DC Voltage/Fan Fault/ Service Required SAS In port status SAS Out port status 0 0 Service 0 0 Service Unit Locator OK OK to Remove Fault/Service Required Figure 1-5 Drive Enclosure LEDs (Back View) Table 1-8 describes the LEDs on the back of the drive enclosure. Table 1-8 Drive Enclosure LEDs (Back) Location LED Power and AC Power Good cooling module Power and DC Voltage/ cooling Fan Fault/ module Service Required Expansion SAS In port status module Expansion module Unit Locator Expansion module OK to Remove Color Green Amber Green White Blue State Description Off AC power is off or input voltage is below the minimum threshold. On AC power is on and input voltage is normal. Off DC output voltage is normal. On DC output voltage is out of range or a fan is operating below the minimum required RPM. Off The port is empty or the link is down. On The port link is up and connected. Off Normal operation. Blink Physically identifies the expansion module. Off Not implemented. Chapter 1 Before You Begin 21