HP 2000fc HP StorageWorks 2012fc Modular Smart Array user guide (481597-001, M - Page 53

Configuring Your Web Browser for SMU, If you cannot your access your system for at least three minutes

Page 53 highlights

9. In the host computer's command window, type the following command to verify Ethernet connectivity, first for controller A and then for controller B: ping IP-address If you cannot your access your system for at least three minutes after changing the IP address, your network might require you to restart the management controller using the serial CLI. When you restart a management controller, communication with it is temporarily lost until it successfully restarts. Type the following command to restart the management controller on both controllers: restart mc both Configuring Your Web Browser for SMU Before using SMU to perform remaining steps, ensure that your web browser is properly configured according to the following guidelines: ■ Use one of the following browsers: ■ Microsoft Internet Explorer 5.5 or later ■ Mozilla Firefox 1.0.7 or later ■ Because SMU uses popup windows to indicate the progress of user-requested tasks, disable any browser features or tools that block popup windows. ■ For optimal performance, set your browser to use stored (cached) web pages. Note - Changing your browser cache setting might affect other sites you visit with your browser. ■ To optimize display, use a color monitor and set its color quality to the highest setting. ■ For Internet Explorer, to ensure you can navigate beyond SMU login page, set the local-intranet security option to medium or medium-low. Chapter 4 Configuring a System for the First Time 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

Chapter 4
Configuring a System for the First Time
53
9.
In the host computer's command window, type the following command to verify
Ethernet connectivity, first for controller A and then for controller B:
If you cannot your access your system for at least three minutes
after changing
the IP address
, your network might require you to restart the management
controller using the serial CLI. When you restart a management controller,
communication with it is temporarily lost until it successfully restarts.
Type the following command to restart the management controller on both
controllers:
Configuring Your Web Browser for SMU
Before using SMU to perform remaining steps, ensure that your web browser is
properly configured according to the following guidelines:
Use one of the following browsers:
Microsoft Internet Explorer 5.5 or later
Mozilla Firefox 1.0.7 or later
Because SMU uses popup windows to indicate the progress of user-requested
tasks, disable any browser features or tools that block popup windows.
For optimal performance, set your browser to use stored (cached) web pages.
Note –
Changing your browser cache setting might affect other sites you visit with
your browser.
To optimize display, use a color monitor and set its color quality to the highest
setting.
For Internet Explorer, to ensure you can navigate beyond SMU login page, set
the local-intranet security option to medium or medium-low.
ping
IP-address
restart mc both