HP 300X HP JetDirect Print Servers 600N/400N/500X/300X Administrator's Guide - - Page 133
HP JetDirect Configuration Messages 127, Table 7.5, General HP JetDirect Messages 13 of 15 - firmware download
UPC - 882780300842
View all HP 300X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Table 7.5 General HP JetDirect Messages (13 of 15) Message Description TRYING TO CONNECT TO SERVER The HP JetDirect print server is trying to connect to the print server or NetWare file server after being configured. Wait for the print server to establish a connection with the print or file server. TURN PRINTER OFF/ON This message may appear after you upgrade to a new version of firmware. When this message appears, turn the printer off, then back on to enable any new functionality that was recently downloaded. UNABLE TO ATTACH TO QUEUE A failure was detected when the HP JetDirect print server tried to attach to one of the queues assigned to the print server object. This may be because no servers are allowed to attach to this queue. There may also be a networking or security problem. Use PCONSOLE to make sure that servers are allowed to attach to the queue, to delete the print server object from the list of queue servers if you want the HP JetDirect print server to service other queues, or to delete the queue and create a new one (the print server object must be added to the list of queue servers). UNABLE TO CONNECT TO SERVER When the HP JetDirect print server is configured for multiple file servers, the error is only displayed on the configuration page if none of the file servers made the connection. Remote Printer mode: The HP JetDirect print server was unable to establish an SPX connection with the print server. Make sure that the print server is running and that all cables and routers are functioning correctly. Queue Server mode: The HP JetDirect print server could not establish an NCP connection to the file server. Make sure that the correct file servers are connected. UNABLE TO FIND SERVER When multiple file servers are configured, the error is only displayed on the configuration page if none of the file servers were successfully connected. The HP JetDirect print server was unable to find the NetWare print server (Remote Printer mode) or file server (Queue Server mode). (There was no response to service queries for advertising print servers or file servers that matched the configured print server or file server name.) Make sure that the print server or file server is running and that the print server or file server name configured on the HP JetDirect print server matches the actual name used by the print server or file server. Also make sure that all cables and routers are functioning correctly. EN HP JetDirect Configuration Page Messages 127