HP 300X HP JetDirect Print Servers 600N/400N/500X/300X Administrator's Guide - - Page 50
In Windows NT 4.0 or Windows 2000, factory values. - reset
UPC - 882780300842
View all HP 300X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
where is the desired IP address to be assigned to the print server. The arp command writes the entries to the arp cache on the workstation, and the ping command configures the IP address on the print server. For example: q In Windows NT 4.0 or Windows 2000 arp -s 13.32.8.98 00-b0-60-a2-31-98 ping 13.32.8.98 q In UNIX arp-s 13.32.8.98 00:b0:60:a2:31:98 ping 13.32.8.98 Note Once the IP address has been set on the print server, additional arp and ping commands will be ignored. Once the IP address is configured, arp and ping cannot be used unless the print server is reset to factory values. On UNIX systems, the arp -s command may vary between different systems. Some BSD-based systems expect the IP address (or host name) in reverse order. Other systems may require additional parameters. See your system documentation for specific command formats. 44 TCP/IP Configuration EN