HP 300X HP JetDirect Print Servers 600N/400N/500X/300X Administrator's Guide - - Page 53
local echo, Terminal, Preferences, display, local, are RARP, DHCP, or Telnet/Front Panel. - jetdirect telnet commands
UPC - 882780300842
View all HP 300X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Note The Present Config field in the Telnet Configuration menu describes how the HP JetDirect print server is configured. For example, if the HP JetDirect print server is configured by your BOOTP server, the menu will contain the line, "present config=BOOTP." Other possible configuration types are RARP, DHCP, or Telnet/Front Panel. Note On Windows systems local echo should be selected. To determine if local echo is enabled, perform the following: q Windows 95/98/NT: Click Terminal and Preferences. q Windows 2000: Run Microsoft Telnet and enter the display command. On UNIX systems, it is not necessary to select local echo. 4. At the Telnet prompt ">" type: parameter: value then press [Enter], where parameter refers to the configuration parameter you are defining, and value refers to the definitions you are assigning to that parameter. Each parameter entry is followed by a carriage return. See Table 3.3 for examples on assigning configuration parameters. EN TCP/IP Configuration 47