HP 300X HP JetDirect Print Servers 600N/400N/500X/300X Administrator's Guide - - Page 55
TCP/IP Configuration 49, Table 3.3, Telnet Configuration Parameter Examples 1 of 2 - jetdirect telnet
UPC - 882780300842
View all HP 300X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Table 3.3 Telnet Configuration Parameter Examples (1 of 2) IP Address Parameter Example ip: 13.32.11.24 where ip identifies the parameter and 13.32.11.24 specifies the address for the printer. By typing this parameter, you can overwrite the IP address used to make the Telnet connection with one you have selected. Subnet Mask Example subnet-mask: where subnet-mask identifies the 255.255.255.0 parameter and 255.255.255.0 specifies the subnet mask. Default Gateway default-gw: Example 13.32.11.85 where default-gw identifies the parameter and 13.32.11.85 specifies the IP address of the gateway. Note: If the HP JetDirect print server is configured by DHCP and you change the subnet mask or the default gateway address (using front-panel, Telnet, or other tool), you should change the IP address to release the present IP address back to the DHCP server IP address pool. Syslog Server Example syslog-server: 13.32.11.85 where syslog-server identifies the parameter and 13.32.11.85 specifies the IP address of that server. Protocol IPX/SPX: 1 Enabling/Disabling dlc-llc: 1 Example ethertalk: 1 (1 enables, 0 disables) (1 enables, 0 disables) (1 enables, 0 disables) Idle Timeout Parameter Example idle-timeout: 120 where idle-timeout identifies the parameter and 120 specifies the number of seconds an idle print data connection is allowed to remain open. If you set this parameter to 0, the connection does not terminate and no other host is able to make a connection. Banner Page Parameter Example banner: 1 (1 enables, 0 disables) EN TCP/IP Configuration 49