HP 6400/8400 HP StorageWorks Enterprise Virtual Array updating product softwar - Page 15
Pre-upgrade tasks, Checking current controller software version
View all HP 6400/8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
2 Pre-upgrade tasks You should perform several tasks before starting the upgrade to minimize the time required to complete the XCS upgrade procedure. The required tasks differ depending on your system configuration and HP Command View EVA implementation. They focus on upgrading components to ensure they meet the supported configuration for XCS 09522000. Table 6 provides a checklist so you can track your progress as you perform these pre-upgrade tasks. Checking current controller software version Estimated time to complete: About 5 minutes When to perform: Any time prior to the upgrade To check your controller software, follow these steps: 1. Open HP Command View EVA. 2. In the navigation pane, select the array you plan to upgrade. The Initialized Storage System Properties window opens. The version field shows the current version. Checking current software versions Estimated time to complete: 10-15 minutes When to perform: Any time prior to the upgrade When upgrading the system software, you must upgrade related management software to the correct version as required. Use Table 2 to collect version information for your current software. You must upgrade any software that does not meet the required version. HP StorageWorks Enterprise Virtual Array updating product software guide (XCS 09522000) 15