HP 6400/8400 HP StorageWorks Enterprise Virtual Array updating product softwar - Page 45
Preparing an HP Continuous Access EVA environment for upgrading
View all HP 6400/8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Preparing an HP Continuous Access EVA environment for upgrading NOTE: HP Continuous Access EVA is currently available with server-based management only. Estimated time to complete: Varies depending on replication configuration When to perform: As close as possible to the upgrade When upgrading an EVA in an HP Continuous Access EVA environment, the following requirements must be met. See HP StorageWorks Continuous Access EVA implementation guide for more information. • Before you upgrade the controller software, you must upgrade HP Command View EVA (and layered applications) to the required version on both the source and destination storage systems. • Before you upgrade any storage system in an HP Continuous Access EVA relationship, ensure that all storage systems in the storage network are running the same version of controller software. This will ensure that when you upgrade one storage system, the storage network will have only two versions of controller software. You cannot have more than two versions in an HP Continuous Access EVA environment. • During the time that the HP Continuous Access EVA storage systems are running different controller software versions, you cannot make any configuration changes to your storage systems. • You must perform the necessary upgrades to the storage systems in the HP Continuous Access EVA relationship within 60 days (1440 hours) to make all controller software versions the same. CAUTION: In an HP Continuous Access EVA environment, do not begin the upgrade until the following conditions are met. If you attempt to upgrade the controllers before the following conditions are met, controller operation will fail. • Ensure that no DR group is logging, merging, or copying. Furthermore, none of the DR groups can be in a failsafe locked state. 1. Click the DR group icon in the Navigation pane. 2. Check the Log state in the DR Group Properties window. • Ensure the connection between the storage systems is not compromised or failed. 1. Click the Data Replication folder in the Navigation pane. 2. Check the Connection State in the Data Replication Folder Properties window. • All EVA storage systems must be running normally with fully functional controller pairs. • After upgrading the first storage system (for example, the source), wait at least three minutes and no more than 60 days before upgrading the second storage system. Ensure the preceding conditions are met on the second system. HP StorageWorks Enterprise Virtual Array updating product software guide (XCS 09522000) 45