HP 6400/8400 HP StorageWorks Enterprise Virtual Array updating product softwar - Page 66
Upgrading firmware on an individual disk, Step 7. Entering storage system passwords
View all HP 6400/8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Figure 25 Code Load Disk Drives - Page 3 window . 11. Click Finish. Upgrading firmware on an individual disk If it is necessary to upgrade the firmware on an individual disk, the firmware and installation instructions can be downloaded from the following website: http://www.hp.com/support/evadiskfirmware IMPORTANT: Upgrading disk drive firmware on an individual disk can be performed online or offline, unless the disk is a member of a disk group that contains Vraid0 virtual disks. If so, the disk must be ungrouped before the disk drive firmware can be upgraded. Step 7. Entering storage system passwords Estimated time to complete: 10-15 minutes NOTE: This step is required only if you use password protection on the storage system. Set the storage system password by selecting Configure Administrator login options in the WOCP (EVA4400) or use the OCP (EVA6400/8400). Long passwords (up to 16 characters) are supported. The password must meet the following requirements: 66 Upgrading the Enterprise Virtual Array