HP 650 User Guide - Page 63

Be careful not to scratch the glass surface., Replace the roller in reverse order

Page 63 highlights

Clean the document scanner area 4. Clean the document feeder rubber piece at the back of the control panel. 5. Carefully wipe the scanning glass with a soft, dry, lint free cloth. • If the glass is very dirty, first wipe it with a slightly dampened cloth, then with a dry one. • Be careful not to scratch the glass surface. 6. Replace the roller in reverse order, and then close the control panel firmly until it clicks into place. Care and maintenance 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86

Care and maintenance
55
Clean the document scanner area
4.
Clean the document feeder rubber piece at the back of the control panel.
5.
Carefully wipe the scanning glass with a soft, dry, lint free cloth.
If the glass is very dirty, first wipe it with a slightly dampened cloth, then
with a dry one.
Be careful not to scratch the glass surface.
6.
Replace the roller in reverse order, and then close the control panel firmly
until it clicks into place.