HP 750c HP DesignJet 700/750C Plus Plotters Quick Reference Guide - C4705-9004 - Page 11

Scroll until the display shows the type of media you are loading*, and then press the Enter key. SELECT MEDIA Opaque bond ↑ ↓ Enter The plotter checks the sheet's size and alignment, then advances it to the start of the page. When loading is complete, the "STATUS / Ready" screen is displayed. *For advice on media types, see page 12. 0014 If you have difficulty in loading a sheet, see the "Troubleshooting" section in the User's Guide. To Load Media the Right Way Up Media Type Opaque bond Translucent bond Natural tracing paper Vellum Coated paper Heavy coated paper Matte film Clear film High-gloss photo paper* Semi-gloss photo paper* High-gloss film* Media-Loading Tips Both sides are the same. If the sheet is curled, load with the convex (hollow) side toward you. Load with the coated side underneath. On HP Coated Paper and Heavyweight Coated Paper, look for the small notch in the corner: D When loading in portrait orientation, make sure the notch is on the right side of the leading edge. D When loading in landscape orientation, make sure the notch is on the left side of the leading edge. Load with the matte side underneath. Load with the rougher side underneath. Load with the glossy side underneath. *These media types are not supported by the HP DesignJet 700 plotters C4705A and C4706A. 9