HP 750c HP DesignJet 700/750C Plus Plotters Quick Reference Guide - C4705-9004 - Page 9
To Unload a Plot on Roll Media, To Unload Unused Roll Media, Supported Media Sizes and Margin - carriage
View all HP 750c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
To Unload a Plot on Roll Media When you use roll media, the plotter automatically waits until the required drying time has elapsed before cutting the media and dropping the plot into the media bin. If you wish to adjust the drying times, refer to the User's Guide. To Unload Unused Roll Media 1 Raise the media lever to release the media. 2 Open the roll cover and turn the media stop to wind the media out of the plotter and onto the roll. Raise the media lever Wind the roll 3 Lower the media lever. 1840a Supported Media Sizes and Margin Settings Media Width (Carriage Axis) E/A0-size plotter: 190-917 mm (7.5 in-36.1 in) D/A1-size plotter: 190-625 mm (7.5 in-24.6 in) Media Length (Paper Axis) Roll: 210 mm-15.2 m (8.3 in-50 ft) Sheet: 210 mm-1.6 m (8.3 in-64 in) Leading and Trailing Edges Normal: 17 mm (0.67 in) Smaller (roll media only): 10 mm (0.39 in) Side Margins 5 mm (0.2 in) 5 mm (0.2 in) All the above measurements are 2 mm (0.08 in). For plotting area (media size minus margins) see User's Guide. 7