HP 8/24 Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010) - Page 104
AG-1011, Message, Probable Cause, Recommended, Action, supportFtp, supportSave, Severity, ag --mapShow
View all HP 8/24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
2 AG-1011 AG-1011 Message , [AG-1011], ,, WARNING, , Sending FDISC failed on N_Port . Probable Cause Indicates there was a failure sending discover F_Port service parameter request from the Access Gateway to the fabric switch. Recommended Action Check the configuration of the fabric switch connected to the Access Gateway. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING AG-1012 Message , [AG-1012], ,, WARNING, , Sending logout(LOGO)request failed on N_Port . Probable Cause Indicates there was a failure sending an N_Port logout request from the Access Gateway to the fabric switch. Recommended Action Check the configuration of the fabric switch connected to the Access Gateway. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING AG-1013 Message , [AG-1013], ,, INFO, , F_Ports mapped to N_Port failed over to other N_Ports. Probable Cause Indicates the specified N_Port is failing over to other N_Ports connected to the same fabric. Recommended Run the ag --mapShow to display updated F_Port-to-N_Port mapping. Action Severity INFO AG-1014 Message , [AG-1014], ,, INFO, , Failing back F_Ports mapped to N_Port . Probable Cause Indicates the specified N_Port is failing back F_Ports mapped to the specified N_Port. Recommended Run the ag --mapShow command to display updated F_Port- to-N_Port mapping. Action 28 Fabric OS Message Reference 53-1001767-01