HP 8/24 Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010) - Page 586
SEC-1036, Severity, Message, Probable Cause, securePolicyCreate, Recommended, Action
View all HP 8/24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 586 highlights
90 SEC-1036 Severity ERROR SEC-1036 Message , [SEC-1036], ,, ERROR, , Device name is invalid due to a missing colon. Probable Cause Indicates one or more device names mentioned in the securePolicyCreate or securePolicyAdd command does not have the colon character (:) as required. Recommended Run the secPolicyCreate or secPolicyAdd command with a properly formatted device name Action parameter. Severity ERROR SEC-1037 Message , [SEC-1037], ,, ERROR, , Invalid WWN format . Probable Cause Indicates the world wide name (WWN) entered in the policy member list had an invalid format. Recommended Run the command again using the standard WWN format, 16 hexadecimal digits grouped as eight Action colon separated pairs. For example: 50:06:04:81:D6:F3:45:42. Severity ERROR SEC-1038 Message , [SEC-1038], ,, ERROR, , Invalid domain . Probable Cause Indicates an invalid domain ID was entered. Recommended Verify that the domain ID is correct. If it is not, then re-run the command using the correct domain Action ID. Severity ERROR SEC-1040 Message , [SEC-1040], ,, ERROR, , Invalid portlist (). Cannot combine * with port member in the same portlist. Probable Cause Indicates the port list contains the wildcard asterisk (*) character. You cannot use the asterisk in a port list. Recommended Enter the port list values without any wildcards. Action 510 Fabric OS Message Reference 53-1001767-01