HP Business Inkjet 2200/2250 HP Business InkJet 2200/2250 Printer - (English) - Page 22

Message REPLACE [COLOR] PRINTHEAD [COLOR] PRINTHEAD MISSING BAD INK CARTRIDGE OR PRINTHEAD LOAD [TRAY] WITH [MEDIA TYPE] [MEDIA SIZE] PRINTED PAGE IS DRYING... PRESS RESUME TO CONTINUE PERSONALITY CARD NOT RECOGNIZED RESET JETDIRECT CARD CLOSE ALL COVERS OUT OF MEMORY Explanation The printer detects a faulty ink printhead. The printer cannot detect the ink printhead because it is missing, improperly installed, or defective. The printer detects a faulty ink cartridge or printhead. Printer requires media of a specific type and size to be loaded in specified paper tray. Printer is letting the current page dry. Solution Reinstall the faulty ink printhead and try to print. Make sure the shipping tape has been removed. If the error persists, remove the printhead and use a dry, lintfree, soft cloth to gently clean any ink off the contact pads. Reinstall the printhead and try to print. If the error persists, replace the printhead. Open the ink printhead door and check if the printhead is missing, improperly installed, or the wrong printhead. If none of these solutions work, replace the printhead. If the error persists, call HP. Follow the instructions in the printer message. Follow the instructions in the printer message. Remove the wet page and press the Resume button to continue printing. The printer cannot detect the card because it is missing, improperly installed, or defective. Prompts user to reset the internal parameters of the JetDirect card. The printer will not print until all access covers are properly closed. The printer is out of memory and cannot print the current job. Reinstall the personality card or replace it. If the error message persists, call HP. From the RESET Menu, press the Value Button to select EIO RESET. Follow the instructions in the printer message. Cancel the current print job, and add additional memory, or reduce the complexity of the document you are trying to print. 5-6