HP Cisco MDS 9020 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rele - Page 57

Caveats Send documentation comments to [email protected] • CSCsr59290 Symptom: Splitter errors occur on a first Control Virtual Target (CVT), when a second CVT is created on the same SSM module. This occurs when a second CVT is created on the same Data Path Processor (DPP) as that of the first one. This also occurs when the DVT and the RP appliance target ports use the same front panel ports as the DPP. Workaround: This issue is resolved. • CSCsr96205 Symptom: When generating a scheduled report, the pictures are not displayed. Workaround: This issue is resolved. • CSCsr98144 Symptom: If a sync loss is received for a non-existing fabric, the XBAR manager transitions to a state from which it does not exit. Issuing the show system internal xbar internal event-history command displays the following: FSM: Transition at 385036 usecs after Wed Jul 2 11:42:22 2008 Previous state: [XBM_MOD_ST_INSERTED] Triggered event: [XBM_MOD_EV_LC_LOST_SYNC] Next state: [XBM_MOD_ST_RESYNC] FSM: Transition at 393318 usecs after Wed Jul 2 11:42:22 2008 Previous state: [XBM_MOD_ST_RESYNC] Triggered event: [XBM_MOD_EV_LC_LOST_SYNC] Next state: [No transition found] FSM: Transition at 437193 usecs after Wed Jul 2 11:44:49 2008 Previous state: [XBM_MOD_ST_RESYNC] Triggered event: [XBM_MOD_EV_FAB_ADD] Next state: [No transition found] Workaround: This issue is resolved. • CSCsu29585 Symptom: A DMM Method-2 job that is in progress will move to the failed state if zone changes are made to the zone entries comprising the New Storage port in the active zone set. Workaround: This issue is resolved. • CSCsu31223 Symptom: When using SME, snmpd may fail due to a slow memory leak. Workaround: This issue is resolved. • CSCsu56780 Symptom: A Solaris iSCSI host generates the following warning during long text responses: iscsi: [ID 498442 kern.warning] WARNING: iscsi session(5) protocol error - received unknown itt:0x0 - protocol error This issue occurs when there are a large number of iSCSI target names to report in multiple text response PDUs, in response to SendTargets requests from the iSCSI host. The exact number of target names that will trigger this issue vary depending on each target name length. Workaround: This issue is resolved. • CSCsu88430 Symptom: In some instances, saving a configuration using Fabric Manager may be unsuccessful. As a result, the configuration may be lost. OL-17675-02 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(1b) 57