HP Cisco MDS 9134 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 151
FSPF-3, debug, fc2 pkt, show fspf database, debug fspf error, show fspf vsan, interface
View all HP Cisco MDS 9134 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] FSPF-3 Error Message FSPF-3-BAD_FC2_PKT: Received bad FC2 packet on interface [chars] VSAN [dec] : [chars]. Explanation Fabric Shortest Path First (FSPF) received a bad FC2 packet on the interface and VSAN shown in the error message. The error description is shown in the error message. Recommended Action FSPF daemon has received a bad FC frame. Provide the output of the debug fc2 pkt CLI command to your customer service representative.You can alternatively use Fabric Manager and/or Device Manager instead of the command line method. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FSPF-3-CHECKSUM_FAIL: Checksum test failed for LSR domain [dec] in VSAN [dec]. Explanation Periodic database checksum test failed for LSR for the domain and VSAN shown in the error message. Recommended Action This indicates that the internal database is corrupted because of some memory corruption problem. Provide the output of show fspf database to your customer service representative. You may need to power cycle the switch. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FSPF-3-FC2_PROC_ERR: Error in processing [chars] packet on interface [chars] VSAN [dec], Error = [chars]. Explanation An error occurred in processing the FC2 packet on the interface and VSAN shown in the error message. The internal error code is also shown in the error message. Recommended Action Enter debug fspf error to get more information. Make sure there is no misconfiguration of FSPF parameters on the two ends of the interface. Provide the output of the show fspf vsan [vsan-id] and show fspf vsan[vsan-id] interface commands and the debug fspf fc pkt command results for the specific interface to your customer service representative. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message FSPF-3-FLOOD_ERR: Error in flooding the local LSR in VSAN [dec] , Error = [chars]. Explanation Fabric Shortest Path First (FSPF) had an error in flooding the local LSR in VSAN shown in the error message. The error description is shown in the error message. Recommended Action Provide the output of the debug fspf flood and debug fspf error CLI commands. If an error is reported in transmitting a packet, check if the interface is up and then enter the debug fc2 error CLI command. Introduced Cisco MDS SAN-OS Release 1.2(2a). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-115