HP Cisco MDS 9134 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 395
Svc-7, Svc_battery Messages, Svc_battery-slot#-2
View all HP Cisco MDS 9134 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 395 highlights
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SVC-6-SVC_SYSLOG_CL_UNJOIN: Node [chars] has left cluster [chars]. Explanation SAN Volume Controller (SVC) interface has left cluster. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-6-SVC_SYSLOG_LC_WWN_PURGE: All WWNs for module [dec] have been purged[chars]. Explanation SAN Volume Controller (SVC) line card has purged all WWNs. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). SVC-7 Error Message SVC-6-SVC_SYSLOG_VSAN_INACTIVE: VSAN [dec] suspended. Explanation VSAN was suspended. This can cause other warnings. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SVC-7-NODE_DEBUG_MSG: [chars]. Explanation Syslog message from a SAN Volume Controller (SVC) interface node. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). SVC_BATTERY Messages This section contains the SAN Volume Controller battery (SVC_BATTERY) messages. SVC_BATTERY-SLOT#-2 Error Message SVC_BATTERY-SLOT#-2-BATTERY_NOT_OPERATIONAL: Battery [dec] temperature [dec] C is outside the operational range (-10C to 65C). Explanation The battery temperature is outside the operational range (-10 to 650C). Recommended Action Enter the show environment fan CLI command or use an equivalent Fabric Manager/Device Manager procedure to determine fan operation and take action to cool down the switch. Introduced Cisco MDS SAN-OS Release 1.3(4a). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-359