HP Cisco MDS 9134 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 414

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-2-STARTUP_CONVERSION_FAILED: Startup config conversion failed during boot (error-id [hex]). Explanation The conversion of the startup configuration failed during boot. Recommended Action If the problem persists, Use the init system CLI command from the switch(boot)# prompt to initialize the configuration partition. Note:This is a disruptive command. This command will initialize the switch, reset the entire internal disk, and reformat the bootflash: partition. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SYSMGR-2-START_SCRIPT_FAILED: Start script (/isan/etc/rc.sysmgr start) failed with return value: ([dec]). Explanation The initialization of the system could not complete. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-2-SWITCHOVER_OVER: Switchover completed. Explanation The switchover is completed. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-2-SYNC_FAILURE_STANDBY_RESET: Failure in syncing messages to standby causing standby to reset. Explanation Resetting the standby because messaging and transaction service (MTS) on the active is unable to synchronize messages to the standby. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-2-UNEXPECTED_GSYNC_RESTART_STANDBY: Sending a message to restart system on standby. Explanation Activity occurred on the active supervisor that is incompatible with the state of standby. System will be restarted on standby. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). 2-378 Cisco MDS 9000 Family System Messages Reference OL-15956-01