HP Cisco MDS 9134 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 412
Cisco Systems, contact Cisco Technical Support., support through a Cisco reseller
View all HP Cisco MDS 9134 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 412 highlights
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SYSMGR-2-REDSTATE_SETFAILED: Failed to set redundancy state: ret_val ([dec]). Explanation The local supervisor is unable to get the redundancy state. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-2-REDUNDANCY_CHANNEL_FAILURE: Remote sup will be rebooted since its coming up as active when local sup is still active. Explanation Remote supervisor is becoming active although local supervisor is still active. As a result, the local supervisor will cause the remote supervisor to reset itself. Recommended Action If the problem persists, contact customer support. If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-2-REDUNDANCY_HEARTBEAT_FAILURE: Heartbeat between active and standby on the redundancy channel not working for last [dec] minutes. Explanation This supervisor is not receiving a heartbeat on the redundancy channel from the other supervisor. This can result in problems during switchover and switchover may fail. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-2-RESTART_SYSTEM_LOG: We will be restarting system soon. Explanation The system will restart because it was trying to do a hot switchover before all the state was transferred to this supervisor. A cold switchover has begun. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-2-RESTORE_RUNTIME_DB_FAILED: Restoring of runtime database for fabric switch upgrade failed during boot (error-id [hex]). Explanation The runtime database cannot be restored during the boot process for the fabric switch upgrade. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.1(1a). 2-376 Cisco MDS 9000 Family System Messages Reference OL-15956-01