HP Cisco MDS 9134 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 1468

show system internal snmp lc Chapter 22 Show Commands Send documentation comments to [email protected] show system internal snmp lc To display the active policies of the line card, use the show system internal snmp lc command. show system internal snmp lc {module-id | counters} Syntax Description module-id counters Specifies the module ID number. Displays the port monitor line card information for module counters. Defaults None. Command Modes EXEC mode. Command History Release NX-OS 4.1(1b) Modification This command was introduced. Usage Guidelines None. Examples The following example shows the port monitor line card information: switch# show system internal snmp lc 4 ----------- No. of ports monitored: 0 ----------- ----------- Ports: Time since activation: 23:51:52 UTC Jun 30 2000 ----------- ----------- Counter Threshold Interval Rising Threshold event Falling Threshold event In Use ------- ---- ------ Link Loss Delta 60 5 4 1 4 Yes Sync Loss Delta 60 5 4 1 4 --More-- switch# The following example shows the port monitor line card information for the module counter: switch# show system internal snmp lc counters switch# 22-400 Cisco MDS 9000 Family Command Reference OL-18089-01, Cisco MDS NX-OS Release 4.x