HP Cisco MDS 9134 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 935

Chapter 20 R Commands run-script Send documentation comments to [email protected] run-script To execute the commands specified in a file, use the run-script command. run-script [bootflash: | slot0: | volatile:]filename Syntax Description bootflash: slot0: volatile: filename Source or destination location for internal bootflash memory. Source or destination location for the CompactFlash memory or PCMCIA card. Source or destination location for volatile file system. Name of the file containing the commands. Defaults Uses the current default directory. Command Modes EXEC mode. Command History Release 1.0(2) 3.0(1) Modification This command was introduced. Updated the Usage Guidelines and Examples with information about user-defined variables. Usage Guidelines To use this command, be sure to create the file and specify commands in the required order. The run-script command accepts user-defined variables as parameters. Examples The following example executes the CLI commands specified in the testfile that resides in the slot0 directory. switch# show file slot0:testfile conf t interface fc 1/1 no shutdown end sh interface fc1/1 In response to the run-script command, this is the file output: switch# run-script slot0:testfile 'conf t' Enter configuration commands, one per line. End with CNTL/Z. 'interface fc 1/1' 'no shutdown' 'end' OL-18089-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Command Reference 20-45