HP Cisco MDS 9134 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 224

clear santap module Chapter 4 C Commands Send documentation comments to [email protected] clear santap module To clear SANTap information, use the clear santap module command. clear santap module slot-number {avt avt-pwwn [lun avt-lun] | itl target-pwwn host-pwwn | session session-id} Syntax Description slot-number avt avt-pwwn lun avt-lun itl target-pwwn host-pwwn session session-id Specifies the Storage Services Module (SSM) module number. The range is 1 through 13. Removes the appliance virtual target (AVT) pWWN. The format is hh:hh:hh:hh:hh:hh:hh:hh. (Optional) Removes the appliance virtual target (AVT) LUN. The format is 0xhhhh[:hhhh[:hhhh[:hhhh]]]. Removes the SANTap Initiator Target LUN (ITL) triplet. The format of the target-pwwn and the host-pwwn is hh:hh:hh:hh:hh:hh:hh:hh. Removes a session. The range for session ID is 0 through 2147483647 Defaults None. Command Modes EXEC mode. Command History Release 3.0(1) Modification This command was introduced. Usage Guidelines None. Examples The following example shows how to remove a SANTap session: switch# clear santap module 13 session 2020 Related Commands Command santap module show santap module Description Configures the mapping between the Storage Services Module (SSM) and the VSAN where the appliance is configured. Displays the configuration and statistics of the SANTap feature. 4-84 Cisco MDS 9000 Family Command Reference OL-18089-01, Cisco MDS NX-OS Release 4.x