HP Cisco MDS 9134 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 1491

Chapter 22 Show Commands show tlport Send documentation comments to [email protected] show tlport To display configured TL port information, use the show tlport command show tlport {alpa-cache | discapp fcid fcid-id [vsan vsan-id] [verbose] | interface fc slot/port {all | private | proxied | topology | unsupported} | list [vsan vsan-id]} Syntax Description alpa-cache discapp fcid fcid-id verbose vsan vsan-id interface fc slot/port all private proxied topology unsupported list Displays the contents of the ALPA cache. Displays private N port parameters. Specifies the FCID of the N port. Specifies the verbose mode. Specifies the N port VSAN ID. The range is 1 to 4093. Displays TL ports in the selected interface. Specifies the Fiber Channel interface at the specified slot and port. Displays all proxied & private devices on this TL Port. Displays all private devices on this TL Port. Displays all proxied devices on this TL Port. Displays loop topology for this TL Port. Displays all unsupported devices on this TL Port. Displays TL ports in all VSANs. Defaults None. Command Modes EXEC mode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines The show tlport command displays the TL port interface configurations. This command provides a list of all TL ports configured on a box and displays the associated VSAN, the FCID for the port (only domain and area are valid), and the current operational state of the TL port (up or initializing). Examples The following example displays the TL ports in all VSANs. switch# show tlport list Interface Vsan FC-ID State fc1/16 1 0x420000 Init fc2/26 1 0x150000 Up OL-18089-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Command Reference 22-423