HP Cisco MDS 9134 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 802

move Chapter 15 M Commands Send documentation comments to [email protected] move To remove a file from the source file and place it in the destination file, use the move command in EXEC mode. move {bootflash: | slot0: | volatile:} [directory/] filename {bootflash: | slot0: | volatile:} [directory/] filename Syntax Description bootflash: slot0: volatile: directory filename Source or destination location for internal bootflash memory. Source or destination location for the CompactFlash memory or PCMCIA card. Source or destination location for volatile memory. Specifies the name of the directory. Specifies the name of the file to move or create. Defaults None. Command Modes EXEC mode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines If you do not specify the directory name in the command line, the switch prompts you for it. Examples The following example moves the file called samplefile from the slot0 directory to the mystorage directory: switch# move slot0:samplefile slot0:mystorage/samplefile Related Commands Command dir mkdir rmdir Description Displays a list of files on a file system. Creates a directory in the Flash file system. Removes an existing directory in the Flash file system. 15-16 Cisco MDS 9000 Family Command Reference OL-18089-01, Cisco MDS NX-OS Release 4.x