Home » HP Manuals » Storage Devices » HP Cisco MDS 9134 » Manual Viewer

HP Cisco MDS 9134 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 399

debug fdmi

Add to My Manuals
Save this manual to your list of manuals

Page 399 highlights

Chapter 6 Debug Commands debug fdmi Send documentation comments to [email protected] debug fdmi To enable debugging for the Fabric-Device Management Interface (FDMI) feature, use the debug fdmi command in EXEC mode. To disable a debug command, use the no form of the command or use the no debug all command to turn off all debugging. debug fdmi {all | errors | fdmi-messages [vsan vsan-id] | ha | mts {pkt {both | rx [node range | opcode range | sap range] | tx} | pkthdr {both | tx | rx [numpkt range]} | pss | trace} no debug fdmi {all | errors | fdmi-messages [vsan vsan-id] | ha | mts {pkt {both | rx [node range | opcode range | sap range] | tx} | pkthdr {both | tx | rx [numpkt range]} | pss | trace} Syntax Description all errors fdmi-messages vsan vsan-id ha mts pkt both tx node range opcode range sap range rx pkthdr numpkt range pss trace Enables debugging for all FDMI features. Enables debugging for FDMI error conditions. Enables the dump of FDMI PDUs. (Optional) Restricts debugging to the specified VSAN. Enables the dump of HA synchronization messages. Enables debugging for FDMI tx/rx MTS events. Enables debugging for FCC tx/rx FCC packets. Specifies debugging in both the transmit and receive directions. Specifies debugging in the transmit direction, Specifies the node for the packets in the receive direction. The integer range is from 1 to 4096. Specifies the opcode for the packets in the receive direction. The integer range is from 1 to 4096. Specifies the sap for the packets in the receive direction. the integer range is from 1 to 4096. Specifies debugging in the receive direction. Enables debugging for FCC tx/rx FCC headers. Specifies the number of required packets Enables debugging for FDMI PSSs. Restricts debugging for FDMI traces. Defaults Disabled. Command Modes EXEC mode. Command History Release 1.3(2) Modification This command was introduced. OL-18089-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Command Reference 6-49

Section	Page
Cisco MDS 9000 Family Command Reference, Release 4.x	1
Contents	3
New and Changed Information	35
Preface	41
CLI Overview	47
About the Switch Prompt	48
About the CLI Command Modes	49
Understanding CLI Command Hierarchy	50
EXEC Mode Options	51
Configuration Mode Options	53
Navigating Through CLI Commands	59
Getting Help	59
Command Completion	59
Using the no and Default Forms of Commands	60
Port Names and Port Mapping	60
Entering CLI Commands	62
Viewing Switch Configurations	62
Saving a Configuration	65
Clearing a Configuration	65
Searching and Filtering CLI Output	66
Multiple Filter Commands	67
Searching and Filtering CLI Output Examples	67
Displaying Users	70
Sending Messages to Users	70
Using the ping Command	70
Using traceroute	71
Setting the Switch’s Shell Timeout	71
Setting the Switch’s Terminal Timeout	72
Setting the Switch’s Terminal Type	72
Setting the Switch’s Terminal Length	72
Setting the Switch’s Terminal Width	73
Displaying Terminal Settings	73
Using CLI Variables	73
User-Defined CLI Session Variables	73
User-Defined CLI Persistent Variables	74
System Defined Variables	75
Using Command Aliases	76
Defining Command Aliases	76
About Flash Devices	76
Internal bootflash:	77
External CompactFlash (Slot0)	77
Formatting Flash Disks and File Systems	77
Initializing bootflash:	78
Formatting Slot0:	78
Using the File System	78
Setting the Current Directory	79
Displaying the Current Directory	79
Listing the Files in a Directory	79
Creating a New Directory	80
Deleting an Existing Directory	80
Moving Files	80
Copying Files	81
Deleting Files	81
Displaying File Contents	81
Saving Command Output to a File	82
Directing show Command Output to a File	82
Compressing and Uncompressing Files	82
Displaying the Last Line in a File	83
Executing Commands Specified in a Script	83
Setting the Delay Time	84
Role-Based CLI	84
Using Valid Formats and Ranges	85
Using Debug Commands	86
Generating debug Command Output	87
Redirecting debug and Error Message Output	87
A Commands	93
aaa accounting logsize	94
aaa accounting default	95
aaa authentication dhchap default	96
aaa authentication iscsi default	97
aaa authentication login	98
aaa authentication login password-aging enable	100
aaa group server	101
abort	103
action cli	104
action counter	105
action event-default	107
action exception log	108
action forceshut	109
action overbudgetshut	110
action policy-default	111
action reload	112
action snmp-trap	113
action syslog	114
active equals saved	116
alert-group	117
arp	119
attach	120
attachpriv	121
attributes (DMM job configuration submode)	122
attribute failover auto	123
attribute qos	124
authentication	125
autonomous-fabric-id (IVR topology database configuration)	127
autonomous-fabric-id (IVR service group configuration)	129
autonomous-fabric-id database	131
auto-volgrp	132
B Commands	133
banner motd	134
boot	136
bport	138
bport-keepalive	139
broadcast	140
C Commands	141
callhome	142
callhome test	144
cd	145
cdp	146
cfs distribute	148
cfs ipv4 distribute	150
cfs ipv4 mcast-address	152
cfs ipv6 distribute	154
cfs ipv6 mcast-address	156
cfs region	158
cfs static-peers	160
channel mode active	161
channel-group	162
cimserver	163
cimserver clearcertificate	165
cimserver loglevel	166
class	167
clear accounting log	169
clear arp-cache	170
clear asic-cnt	171
clear callhome session	173
clear cdp	174
clear cores	175
clear counters (EXEC mode)	176
clear counters (SAN extension N port configuration mode)	177
clear crypto ike domain ipsec sa	178
clear crypto sa domain ipsec	179
clear debug-logfile	180
clear device-alias	181
clear dpvm	182
clear dpvm merge statistics	183
clear fabric-binding statistics	184
clear fcanalyzer	185
clear fcflow stats	186
clear fcns statistics	187
clear fcs statistics	188
clear fctimer session	189
clear fc-redirect config	190
clear fc-redirect decommission-switch	191
clear ficon	193
clear fspf counters	194
clear install failure-reason	195
clear ip access-list counters	196
clear ips arp	197
clear ips stats	198
clear ips stats fabric interface	199
clear ipv6 access-list	200
clear ipv6 neighbors	201
clear islb session	202
clear ivr fcdomain database	203
clear ivr service-group database	204
clear ivr zone database	205
clear license	206
clear line	207
clear logging	208
clear ntp	209
clear port-security	210
clear processes log	212
clear qos statistics	213
clear radius session	214
clear rlir	215
clear rmon alarms	217
clear rmon all-alarms	218
clear rmon hcalarms	219
clear rmon log	220
clear role session	221
clear rscn session vsan	222
clear rscn statistics	223
clear santap module	224
clear ssm-nvram santap module	225
clear scheduler logfile	226
clear screen	227
clear scsi-flow statistics	228
clear sdv	229
clear snmp hostconfig	230
clear ssh hosts	231
clear system reset-reason	232
clear tacacs+ session	233
clear tlport alpa-cache	234
clear user	235
clear vrrp	236
clear zone	237
cli alias name	238
cli var name (EXEC)	240
cli var name (configuration)	242
clock	243
clock set	245
cloud discover	246
cloud discovery	247
cloud-discovery enable	249
cluster	250
code-page	251
commit	253
commit (DMM job configuration submode)	254
contract-id	255
configure terminal	256
copy	257
copy licenses	260
copy ssm-nvram standby-sup	261
counter	262
crypto ca authenticate	264
crypto ca crl request	266
crypto ca enroll	268
crypto ca export	270
crypto ca import	272
crypto ca test verify	274
crypto ca trustpoint	275
crypto global domain ipsec security-association lifetime	277
crypto ike domain ipsec	278
crypto ike domain ipsec rekey sa	279
crypto ike enable	280
crypto ipsec enable	281
crypto key generate rsa	282
crypto key zeroize rsa	284
crypto map domain ipsec (configuration mode)	286
crypto map domain ipsec (interface configuration submode)	288
crypto transform-set domain ipsec	289
customer-id	291
D Commands	293
data-pattern-file	294
deadtime (radius group configuration)	295
deadtime (tacacs+ group configuration)	296
delete	297
delete ca-certificate	299
delete certificate	300
delete crl	302
deny (IPv6-ACL configuration)	303
description	306
destination interface	307
destination-profile	309
device-alias (IVR fcdomain database configuration submode)	312
device-alias (SDV virtual device configuration submode)	313
device-alias abort	314
device-alias commit	315
device-alias database	316
device-alias distribute	317
device-alias import fcalias	318
device-alias mode enhanced	319
device-alias name	321
dir	322
disable	324
discover	325
discover custom-list	326
discover scsi-target	327
distribute	329
dmm module	330
dmm module job	332
do	334
dpvm abort	336
dpvm activate	337
dpvm auto-learn	338
dpvm commit	340
dpvm database	341
dpvm database copy active	343
dpvm database diff	344
dpvm distribute	346
dpvm enable	347
dpvm overwrite-duplicate-pwwn	348
dscp	349
duplicate-message throttle	350
Debug Commands	351
debug aaa	352
debug all	354
debug biosd	355
debug bootvar	356
debug callhome	357
debug cert-enroll	359
debug cdp	361
debug cfs	363
debug cimserver	365
debug cloud	366
debug core	368
debug device-alias	369
debug dmm-debug	371
debug dpvm	373
debug dstats	375
debug ethport	376
debug exceptionlog	378
debug fabric-binding	379
debug fc-tunnel	381
debug fc2	383
debug fc2d	385
debug fcc	387
debug fcdomain	389
debug fcfwd	391
debug fcns	393
debug fcs	395
debug fcsp-mgr	397
debug fdmi	399
debug ficon	401
debug flogi	403
debug fm	405
debug fspf	406
debug hardware arbiter	408
debug idehsd	409
debug ike	410
debug ilc_helper	411
debug ipacl	412
debug ipconf	413
debug ipfc	414
debug ips	415
debug ipsec	417
debug isns	419
debug ivr	421
debug klm	423
debug license	425
debug logfile	426
debug mcast	428
debug mip	430
debug module	431
debug ntp	432
debug npv	433
debug obfl	435
debug platform	436
debug plog	438
debug port	439
debug port-channel	441
debug port-resources	442
debug qos	444
debug radius	445
debug rd-reg	447
debug rdl errors	448
debug rib	449
debug rlir	450
debug rscn	451
debug san-ext-tuner	452
debug scsi-flow	454
debug scsi-target	456
debug sdv	457
debug security	459
debug sensor	460
debug sme	461
debug snmp	463
debug span	465
debug system health	467
debug tacacs+	469
debug tcap	471
debug tlport	472
debug ttyd	473
debug vni	474
debug vrrp	475
debug vsan	477
debug wr-reg	479
debug wwn	480
debug xbar	482
debug xbar_driver	483
debug xbc	484
debug zone	485
E Commands	487
email-contact	488
enable	489
encryption	490
end	491
enrollment terminal	492
errdisable detect cause link-down	493
event	495
event manager applet	500
event manager policy	501
event manager environment	502
exit	503
F Commands	505
fabric	506
fabric-binding activate	507
fabric-binding database copy	509
fabric-binding database diff	510
fabric-binding database vsan	511
fabric-binding enable	513
fabric-membership	514
fcalias clone	515
fcalias name	516
fcalias rename	517
fcanalyzer	518
fcc enable	520
fcc priority	521
fcdomain	522
fcdomain abort vsan	525
fcdomain commit vsan	526
fcdomain distribute	527
fcdomain rcf-reject	528
fcdroplatency	529
fcflow stats	531
fcid-allocation	533
fcid-last-byte	535
fcinterop fcid-allocation	536
fcinterop loop-monitor	537
fcip enable	538
fcip profile	539
fcns proxy-port	540
fcns reject-duplicate-pwwn vsan	541
fcping	542
fc-redirect version2 enable	544
fcroute	546
fcrxbbcredit extended enable	548
fcs plat-check-global vsan	549
fcs register	550
fcs virtual-device-add	551
fcsp dhchap	552
fcsp enable	555
fcsp timeout	556
fctimer	557
fctimer abort	558
fctimer commit	559
fctimer distribute	560
fctrace	561
fc-tunnel	562
feature	564
ficon enable	566
ficon logical-port assign port-numbers	568
ficon port default-state prohibit-all	569
ficon slot assign port-numbers	570
ficon swap	572
ficon-tape-accelerator vsan	574
ficon vsan (EXEC mode)	576
ficon vsan (configuration mode)	578
file	579
find	580
flex-attach virtual-pwwn	581
flex-attach virtual-pwwn auto	582
flex-attach virtual-pwwn interface	583
format	584
fspf config vsan	586
fspf cost	588
fspf dead-interval	589
fspf enable vsan	590
fspf hello-interval	591
fspf passive	592
fspf retransmit-interval	593
G Commands	595
group	596
gzip	597
gunzip	599
H Commands	601
hash	602
host	603
hw-module logging onboard	605
I Commands	607
identity	608
in-order-guarantee	610
initiator	611
install all	612
install clock-module	618
install license	620
install module bios	621
install module epld	622
install module loader	624
install ssi	625
interface	626
interface bay \| ext	628
interface fc	629
interface fc-tunnel	631
interface fcip	633
interface gigabitethernet	636
interface iscsi	638
interface mgmt	640
interface port-channel	641
interface sme	643
interface sme (Cisco SME cluster node configuration submode)	644
interface vsan	646
ip access-group	647
ip access-list	649
ip address (FCIP profile configuration submode)	652
ip address (interface configuration)	653
ip-compression	654
ip default-gateway	656
ip default-network	657
ip domain-list	658
ip domain-lookup	659
ip domain-name	660
ip name-server	661
ip route	662
ip routing	663
ips netsim delay-ms	664
ips netsim delay-us	665
ips netsim drop nth	666
ips netsim drop random	668
ips netsim enable	670
ips netsim max-bandwidth-kbps	671
ips netsim max-bandwidth-mbps	672
ips netsim qsize	673
ips netsim reorder	674
ipv6 access-list	676
ipv6 address	677
ipv6 address autoconfig	679
ipv6 enable	680
ipv6 nd	681
ipv6 route	683
ipv6 routing	685
ipv6 traffic-filter	686
iscsi authentication	687
iscsi duplicate-wwn-check	689
iscsi dynamic initiator	691
iscsi enable	693
iscsi enable module	694
iscsi import target fc	695
iscsi initiator idle-timeout	696
iscsi initiator ip-address	697

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1,000
1,001
1,002
1,003
1,004
1,005
1,006
1,007
1,008
1,009
1,010
1,011
1,012
1,013
1,014
1,015
1,016
1,017
1,018
1,019
1,020
1,021
1,022
1,023
1,024
1,025
1,026
1,027
1,028
1,029
1,030
1,031
1,032
1,033
1,034
1,035
1,036
1,037
1,038
1,039
1,040
1,041
1,042
1,043
1,044
1,045
1,046
1,047
1,048
1,049
1,050
1,051
1,052
1,053
1,054
1,055
1,056
1,057
1,058
1,059
1,060
1,061
1,062
1,063
1,064
1,065
1,066
1,067
1,068
1,069
1,070
1,071
1,072
1,073
1,074
1,075
1,076
1,077
1,078
1,079
1,080
1,081
1,082
1,083
1,084
1,085
1,086
1,087
1,088
1,089
1,090
1,091
1,092
1,093
1,094
1,095
1,096
1,097
1,098
1,099
1,100
1,101
1,102
1,103
1,104
1,105
1,106
1,107
1,108
1,109
1,110
1,111
1,112
1,113
1,114
1,115
1,116
1,117
1,118
1,119
1,120
1,121
1,122
1,123
1,124
1,125
1,126
1,127
1,128
1,129
1,130
1,131
1,132
1,133
1,134
1,135
1,136
1,137
1,138
1,139
1,140
1,141
1,142
1,143
1,144
1,145
1,146
1,147
1,148
1,149
1,150
1,151
1,152
1,153
1,154
1,155
1,156
1,157
1,158
1,159
1,160
1,161
1,162
1,163
1,164
1,165
1,166
1,167
1,168
1,169
1,170
1,171
1,172
1,173
1,174
1,175
1,176
1,177
1,178
1,179
1,180
1,181
1,182
1,183
1,184
1,185
1,186
1,187
1,188
1,189
1,190
1,191
1,192
1,193
1,194
1,195
1,196
1,197
1,198
1,199
1,200
1,201
1,202
1,203
1,204
1,205
1,206
1,207
1,208
1,209
1,210
1,211
1,212
1,213
1,214
1,215
1,216
1,217
1,218
1,219
1,220
1,221
1,222
1,223
1,224
1,225
1,226
1,227
1,228
1,229
1,230
1,231
1,232
1,233
1,234
1,235
1,236
1,237
1,238
1,239
1,240
1,241
1,242
1,243
1,244
1,245
1,246
1,247
1,248
1,249
1,250
1,251
1,252
1,253
1,254
1,255
1,256
1,257
1,258
1,259
1,260
1,261
1,262
1,263
1,264
1,265
1,266
1,267
1,268
1,269
1,270
1,271
1,272
1,273
1,274
1,275
1,276
1,277
1,278
1,279
1,280
1,281
1,282
1,283
1,284
1,285
1,286
1,287
1,288
1,289
1,290
1,291
1,292
1,293
1,294
1,295
1,296
1,297
1,298
1,299
1,300
1,301
1,302
1,303
1,304
1,305
1,306
1,307
1,308
1,309
1,310
1,311
1,312
1,313
1,314
1,315
1,316
1,317
1,318
1,319
1,320
1,321
1,322
1,323
1,324
1,325
1,326
1,327
1,328
1,329
1,330
1,331
1,332
1,333
1,334
1,335
1,336
1,337
1,338
1,339
1,340
1,341
1,342
1,343
1,344
1,345
1,346
1,347
1,348
1,349
1,350
1,351
1,352
1,353
1,354
1,355
1,356
1,357
1,358
1,359
1,360
1,361
1,362
1,363
1,364
1,365
1,366
1,367
1,368
1,369
1,370
1,371
1,372
1,373
1,374
1,375
1,376
1,377
1,378
1,379
1,380
1,381
1,382
1,383
1,384
1,385
1,386
1,387
1,388
1,389
1,390
1,391
1,392
1,393
1,394
1,395
1,396
1,397
1,398
1,399
1,400
1,401
1,402
1,403
1,404
1,405
1,406
1,407
1,408
1,409
1,410
1,411
1,412
1,413
1,414
1,415
1,416
1,417
1,418
1,419
1,420
1,421
1,422
1,423
1,424
1,425
1,426
1,427
1,428
1,429
1,430
1,431
1,432
1,433
1,434
1,435
1,436
1,437
1,438
1,439
1,440
1,441
1,442
1,443
1,444
1,445
1,446
1,447
1,448
1,449
1,450
1,451
1,452
1,453
1,454
1,455
1,456
1,457
1,458
1,459
1,460
1,461
1,462
1,463
1,464
1,465
1,466
1,467
1,468
1,469
1,470
1,471
1,472
1,473
1,474
1,475
1,476
1,477
1,478
1,479
1,480
1,481
1,482
1,483
1,484
1,485
1,486
1,487
1,488
1,489
1,490
1,491
1,492
1,493
1,494
1,495
1,496
1,497
1,498
1,499
1,500
1,501
1,502
1,503
1,504
1,505
1,506
1,507
1,508
1,509
1,510
1,511
1,512
1,513
1,514
1,515
1,516
1,517
1,518
1,519
1,520
1,521
1,522
1,523
1,524
1,525
1,526
1,527
1,528
1,529
1,530
1,531
1,532
1,533
1,534
1,535
1,536
1,537
1,538
1,539
1,540
1,541
1,542
1,543
1,544
1,545
1,546
1,547
1,548
1,549
1,550
1,551
1,552
1,553
1,554
1,555
1,556
1,557
1,558
1,559
1,560
1,561
1,562
1,563
1,564
1,565
1,566
1,567
1,568
1,569
1,570
1,571
1,572
1,573
1,574
1,575
1,576
1,577
1,578
1,579
1,580
1,581
1,582
1,583
1,584
1,585
1,586
1,587
1,588
1,589
1,590
1,591
1,592
1,593
1,594
1,595
1,596
1,597
1,598
1,599
1,600
1,601
1,602
1,603
1,604
1,605
1,606
1,607
1,608
1,609
1,610
1,611
1,612
1,613
1,614
1,615
1,616
1,617
1,618
1,619
1,620
1,621
1,622
1,623
1,624
1,625
1,626
1,627
1,628
1,629
1,630
1,631
1,632
1,633
1,634
1,635
1,636
1,637
1,638
1,639
1,640

Match case Limit results 1 per page

Send documentation comments to [email protected]

6-49

Cisco MDS 9000 Family Command Reference

OL-18089-01, Cisco MDS NX-OS Release 4.x

Chapter 6

Debug Commands

debug fdmi

To enable debugging for the Fabric-Device Management Interface (FDMI) feature, use the

debug fdmi

command in EXEC mode. To disable a

debug

command, use the

form of the command or use the

debug all

command to turn off all debugging.

debug fdmi

{

all

errors

fdmi-messages

[

vsan

vsan-id

] |

mts

{

pkt

{

both

[

node

range

opcode

range

sap

range

] |

} |

pkthdr

{

both

[

numpkt

range

]}

pss

trace

}

no debug fdmi

{

all

errors

fdmi-messages

[

vsan

vsan-id

] |

mts

{

pkt

{

both

[

node

range

opcode

range

sap

range

] |

}

pkthdr

{

both

[

numpkt

range

]}

pss

trace

}

Syntax Description

Defaults

Disabled.

Command Modes

EXEC mode.

Command History

all

Enables debugging for all FDMI features.

errors

Enables debugging for FDMI error conditions.

fdmi-messages

Enables the dump of FDMI PDUs.

vsan

vsan-id

(Optional) Restricts debugging to the specified VSAN.

Enables the dump of HA synchronization messages.

mts

Enables debugging for FDMI tx/rx MTS events.

pkt

Enables debugging for FCC tx/rx FCC packets.

both

Specifies debugging in both the transmit and receive directions.

Specifies debugging in the transmit direction,

node

range

Specifies the node for the packets in the receive direction. The integer

range is from 1 to 4096.

opcode

range

Specifies the opcode for the packets in the receive direction. The integer

range is from 1 to 4096.

sap

range

Specifies the sap for the packets in the receive direction. the integer

range is from 1 to 4096.

Specifies debugging in the receive direction.

pkthdr

Enables debugging for FCC tx/rx FCC headers.

numpkt

range

Specifies the number of required packets

pss

Enables debugging for FDMI PSSs.

trace

Restricts debugging for FDMI traces.

Release

Modification

1.3(2)

This command was introduced.