HP Cisco MDS 9216i Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2 - Page 168
interface ethernet
View all HP Cisco MDS 9216i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
interface ethernet Chapter 2 Ethernet Commands Send comments to [email protected] interface ethernet To enter interface configuration mode for an Ethernet IEEE 802.3 interface, use the interface ethernet command. interface ethernet [chassis_ID/]slot/port Syntax Description chassis_ID slot port (Optional) Specifies the Fabric Extender chassis ID. Chassis ID is 100 to 199. Note This argument is not optional when addressing the host interfaces of a Cisco Nexus 2000 Series Fabric Extender. Specifies a slot from 1 to 3. The following list defines the slots available: • Slot 1 includes all the fixed ports. A Fabric Extender only has a Slot 1. • Slot 2 includes the ports on the upper expansion module (if populated). • Slot 3 includes the ports on the lower expansion module (if populated). Specifies the port number within a particular slot. Command Default None Command Modes Configuration mode Command History Release 4.0(0)N1(1a) 4.0(1a)N2(1) Modification This command was introduced. This command was modified to provide the chassis ID argument. Examples This example shows how to enter configuration mode for Ethernet interface 1/4: switch(config)# interface ethernet 1/4 switch(config-if)# This example shows how to enter configuration mode for a host interface on a Fabric Extender: switch(config)# interface ethernet 101/1/1 switch(config-if)# Related Commands Command show fex show interface ethernet Description Displays all configured Fabric Extender chassis connected to the switch. Displays various parameters of an Ethernet IEEE 802.3 interface. 2-20 Cisco Nexus 5000 Series Command Reference OL-16599-01