HP Cisco MDS 9216i Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2 - Page 514

show logging logfile Chapter 7 System Management Commands Send comments to [email protected] show logging logfile Use the show logging logfile command to display the messages in the log file that were timestamped within the span entered. If you do not enter an end time, the current time is used. show logging logfile [start-time yyyy mmm dd hh:mm:ss] [end-time yyyy mmm dd hh:mm:ss] Syntax Description start-time end-time (Optional) Enter a start time in the format yyyy mmm dd hh:mm:ss. Use three characters for the month (mmm) field, digits for the year (yyyy) and day (dd) fields, and digits separated by colons for the time (hh:mm:ss) field. (Optional) Enter an end time in the format yyyy mmm dd hh:mm:ss. Use three characters for the month (mmm) field, digits for the year (yyyy) and day (dd) fields, and digits separated by colons for the time (hh:mm:ss) field. Command Default None Command Modes EXEC mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Examples This example shows how to display the messages in the log file that were timestamped within the span shown: switch# show logging logfile start-time 2008 mar 11 12:10:00 Related Commands Command logging logfile Description Configures logging to a log file. 7-28 Cisco Nexus 5000 Series Command Reference OL-16599-01