HP Cisco MDS 9216i Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2 - Page 41
con terminal, Cisco Nexus 5000 Series Command Reference, OL-16599-01,
View all HP Cisco MDS 9216i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 1 Basic System Commands configure terminal Send comments to [email protected] configure terminal To enter configuration mode, use the configure terminal command. configure terminal Syntax Description This command has no arguments or keywords. Command Default None Command Modes EXEC mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines Use this command to enter configuration mode. Commands in this mode are written to the running configuration file as soon as you enter them (using the Enter key/Carriage Return). After you enter the configure terminal command, the system prompt changes from switch# to switch(config)#, indicating that the router is in configuration mode. To leave configuration mode and return to EXEC mode, type end or press Ctrl-Z. To view the changes to the configuration that you have made, use the show running-config command. Examples This example shows how to enter configuration mode: switch# configure terminal switch(config)# Related Commands Command copy running-config startup-config end exit (global) show running-config Description Saves the running configuration as the startup configuration file. Ends your configuration session by exiting to EXEC mode. Exits from the current configuration mode to the next highest configuration mode. Displays the current running configuration. OL-16599-01 Cisco Nexus 5000 Series Command Reference 1-19