HP Cisco MDS 9216i Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2 - Page 88
reload
View all HP Cisco MDS 9216i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
reload Chapter 1 Basic System Commands Send comments to [email protected] reload To reload the switch and all attached Fabric Extender chassis or a specific Fabric Extender, use the reload command. reload {all | fex chassis_ID} Syntax Description all fex chassis_ID Reboot the entire Cisco Nexus 5000 Series switch and all attached Fabric Extender chassis. Reboot a specific Fabric Extender chassis. Chassis ID is 100 to 199. Command Default Reloads the Cisco Nexus 5000 Series switch. Command Modes EXEC mode Command History Release 4.0(0)N1(1a) 4.0(1a)N2(1) Modification This command was introduced. Support for the Cisco Nexus 2000 Series Fabric Extender was added. Usage Guidelines The reload command disrupts traffic on the switch and Fabric Extender. Note The reload command does not save the running configuration. Use the copy running-config startup-config command to save the current configuration on the device. Examples This example shows how to reload the Cisco Nexus 5000 Series switch: switch# copy running-config startup-config switch# reload This command will reboot the system. (y/n)? [n] y This example shows how to reload a Fabric Extender: switch# reload fex 101 WARNING: This command will reboot FEX 101 Do you want to continue? (y/n) [n] y Related Commands Command copy running-config startup-config show version Description Copies the current running configuration to the startup configuration. Displays information about the software version. 1-66 Cisco Nexus 5000 Series Command Reference OL-16599-01