HP Cisco MDS 9216i Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2 - Page 703

Chapter 9 Fibre Channel Show Commands show fc2 Send comments to [email protected] show fc2 To display FC2 information, use the show fc2 command. show fc2 {bind | classf | exchange | exchresp | flogi | nport | plogi | plogi_pwwn | port [brief] | socket | sockexch | socknotify | socknport | vsan} Syntax Description bind classf exchange exchresp flogi nport plogi plogi_pwwn port brief socket sockexch socknotify socknport vsan Displays FC2 socket bindings. Displays FC2 classf sessions. Displays FC2 active exchanges. Displays FC2 active responder exchanges. Displays FC2 FLOGI table. Displays FC2 local N ports. Displays FC2 PLOGI sessions. Displays FC2 PLOGI pWWN entries. Displays FC2 physical port table. Displays FC2 physical port table in brief format. Displays FC2 active sockets. Displays FC2 active exchanges for each socket. Displays FC2 local N port PLOGI/LOGO notifications for each socket. Displays FC2 local nports per each socket. Displays FC2 VSAN table. Command Default None Command Modes EXEC mode. Command History Release 4.0(0)N1(1a) Modification This command was introduced. Examples The following example displays FC2 active socket information: switch# show fc2 socket The following example displays FC2 socket binding information: switch# show fc2 bind The following example displays FC2 local N port information: switch# show fc2 nport OL-16599-01 Cisco Nexus 5000 Series Command Reference 9-9