HP Cisco MDS 9216i Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2 - Page 696
show cfs
View all HP Cisco MDS 9216i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 696 highlights
show cfs Chapter 9 Fibre Channel Show Commands Send comments to [email protected] show cfs To display Cisco Fabric Services (CFS) information, use the show cfs command. show cfs {application [name app-name] | lock [name app-name [vsan vsan-id]] | merge status [name app-name [vsan vsan-id]] | peers [name app-name [vsan vsan-id] | regions | status} Syntax Description application name app-name lock vsan vsan-id merge status peers regions status Displays locally registered applications. (Optional) Specifies a local application information by name. Maximum length is 64 characters. Displays the state of application logical or physical locks. (Optional) Specifies the VSAN ID. The range is 1 to 4093. Displays CFS merge information. Displays logical or physical CFS peers. Displays the CFS regions. Displays if CFS distribution is enabled or disabled. Enabled is the default configuration. Command Default None Command Modes EXEC mode. Command History Release 4.0(0)N1(1a) Modification This command was introduced. Examples The following example shows how to display CFS physical peer information for all applications: switch# show cfs peers The following example shows how to display CFS information for all applications on the switch: switch# show cfs application Note The show cfs application command displays only those applications that are registered with CFS. Conditional services that use CFS do not appear in the output unless those services are running. The following example shows how to display CFS information for the device alias application: switch# show cfs application name device-alias Cisco Nexus 5000 Series Command Reference 9-2 OL-16599-01