HP Cisco MDS 9216i Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2 - Page 280
show spanning-tree interface
View all HP Cisco MDS 9216i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 280 highlights
show spanning-tree interface Chapter 3 Ethernet Show Commands Send comments to [email protected] show spanning-tree interface To display information on the STP interface status and configuration of specified interfaces, use the show spanning-tree interface command. show spanning-tree interface {interface slot/port | port-channel number} [active [brief | detail] | brief [active] | cost | detail [active] | edge | inconsistency | priority | rootcost | state] Syntax Description interface type slot/port | Specifies the interface. Use either the type of interface and its slot and port port-channel number number, or the EtherChannel number. active (Optional) Displays information about STP active interfaces only on the specified interfaces. brief (Optional) Displays brief summary of STP information on the specified interfaces. detail (Optional) Displays detailed STP information about the specified interfaces. cost (Optional) Displays the STP path cost for the specified interfaces. edge (Optional) Displays the STP-type edge port information for the specified interfaces. inconsistency (Optional) Displays the port STP inconsistency state for the specified interfaces. priority (Optional) Displays the STP port priority for the specified interfaces. rootcost (Optional) Displays the path cost to the root for specified interfaces. state Current port STP state. Command Default None Command Modes EXEC mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines The STP port type displays only when you have configured the port as either an STP edge port or an STP network port. If you have not configured the STP port type, no port type displays. If you specify an interface that is not running STP, the switch returns an error message. When you are running MST, this command displays the PVST simulation setting. Note If you are running MST, use the show spanning-tree mst command to show more detail on the specified interfaces. 3-26 Cisco Nexus 5000 Series Command Reference OL-16599-01