HP Classmate Notebook PC Classmate Notebook Maintenance and Service Guide - Page 33
sleeves must be installed on the antenna connectors, as shown in the following illustration.
View all HP Classmate Notebook PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
3. Remove the WLAN module (3) by pulling the module away from the slot. NOTE: WLAN modules are designed with a notch to prevent incorrect insertion. NOTE: If the WLAN antennas are not connected to the terminals on the WLAN module, the protective sleeves must be installed on the antenna connectors, as shown in the following illustration. Reverse this procedure to install the WLAN module. Component replacement procedures 27
3.
Remove the WLAN module
(3)
by pulling the module away from the slot.
NOTE:
WLAN modules are designed with a notch to prevent incorrect insertion.
NOTE:
If the WLAN antennas are not connected to the terminals on the WLAN module, the protective
sleeves must be installed on the antenna connectors, as shown in the following illustration.
Reverse this procedure to install the WLAN module.
Component replacement procedures
27