HP Dv4-1124nr HP Pavilion dv4 Entertainment PC - Maintenance and Service Guide - Page 99
Flush Glass display assembly, to remove the enclosure.
UPC - 884420609841
View all HP Dv4-1124nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Flush Glass display assembly 1. If it is necessary to replace the Flush Glass display enclosure or any of the replaceable Flush Glass display assembly components, remove the following screw covers (1) and screws (2): 2. Turn the display assembly over. 3. Slide the display enclosure toward the bottom edge of the assembly (1), and lift up to detach (2). 4. Disconnect the LED board from the enclosure (3) to remove the enclosure. 5. If it is necessary to replace the camera/microphone assembly, remove the two Phillips PM2.5×4.0 screws (1) that secure the camera/microphone module. 6. Lift the module out as far as the camera/microphone module cable allows (2). Component replacement procedures 91
Flush Glass display assembly
1.
If it is necessary to replace the Flush Glass display enclosure or any of the replaceable Flush Glass
display assembly components, remove the following screw covers
(1)
and screws
(2)
:
2.
Turn the display assembly over.
3.
Slide the display enclosure toward the bottom edge of the assembly
(1)
, and lift up to detach
(2)
.
4.
Disconnect the LED board from the enclosure
(3)
to remove the enclosure.
5.
If it is necessary to replace the camera/microphone assembly, remove the two Phillips PM2.5×4.0
screws
(1)
that secure the camera/microphone module.
6.
Lift the module out as far as the camera/microphone module cable allows
(2)
.
Component replacement procedures
91